Main Sales: 01772 431216

Lines open: Monday - Saturday

  1. Home
  2. Brand
  3. Marley Eternit
  4. Concrete Tiles
  5. Marley Edgemere Roof Tile 420 x 330mm Smooth Grey

Marley Edgemere Roof Tile 420 x 330mm Smooth Grey

Marley Edgemere Roof Tile 420 x 330mm Smooth Grey 02290111
Marley Edgemere Roof Tile 420 x 330mm Smooth Grey
Ref: 02290111 £1.310ex VAT Each (£1.570 inc VAT)
Marley Edgemere Roof Tile 420 x 330mm Smooth Grey
Bulk Rates
QuantityPrice (ex VAT)
Stock Item
Buy Now

Check this product can be delivered in your area. Please enter your postcode below.

Please Enter Valid Postcode
  • Description
  • Specification
  • Reviews

Marley 420 x 330mm Edgemere Roof Tile - Smooth Grey

The clean and precise 'slate-like appearance' is enhanced by the thin leading edge and broken-bond laying technique.

At only 18mm thick, Edgemere is sleek in appearance and increases kerb appeal, giving you an affordable evolution from standard interlocking tiles.

With only 9.7 tiles per square metre, Edgemere is a single lap solution, which is quicker and easier to install than natural slate.

Compatible with a full range of ventilation and dry fix systems including bespoke dry verge.

With the ability to perform at pitches as low as 17.5°, Edgemere gives the versatility to be used on a wide range of roof types.

An A+ rating in the BRE Green Guide achieving the lowest environmental impact.

Accreditation to the BES 6001 framework standard for 'Responsible Sourcing'.

Projects using these concrete interlocking slates can now achieve extra credits under BREEAM and The Code for Sustainable Homes.

Pre-holed with single nail hole for ease of installation.

Excellent covering capacity.

Contains 25% less raw material than a standard concrete tile.

Size of slate 420mm x 330mm
Minimum pitch

22.5º (75mm headlap)

17.5º (100mm headlap)

Maximum pitch 90º
Minimum headlap

75mm (22.5º and above)

100mm (below 22.5º)

Maximum gauge 345mm
Tile thickness 18mm (nominal)
Cover width 298mm (nominal)
Hanging length 395mm (nominal)
Covering capcity (net)

9.7 slates/m2 (0.43kN/m2) at 75mm headlap

10.5 slates/m2 (0.47kN/m2) at 100mm headlap

Weight of slating (approx)

44kg/m2 (0.43kN/m2) at 75mm headlap

47.5kg/m2 (0.47kN/m2) at 100mm headlap

Battens required (net)

2.9 lin.m/m2 at 75mm headlap

3.1 lin.m/m2 at 100mm headlap

Batten size recommended

38mm x 25mm for rafters/supports not exceeding 450mm centres (fixed to BS 5534)

50mm x 25mm for rafters/supports not exceeding 600mm centres (fixed to BS 5534)

Fixings 45mm x 3.35mm slate nails
Fixing clips Eaves, verge and slate clips
Authority BS EN 490


There are currently no reviews for this product. If you would like to leave a review, simply press the 'write a review' button below

Stay updated with all our latest news and offers

Newsletter Subscriptions