Main Sales: 01772 431216

Lines open: Monday - Saturday

  1. Home
  2. Building Materials
  3. Cement & Mortar
  4. Repair Mortars
  5. Everbuild Epoxyset NF Epoxy Resin Adhesive - 3Kg

Everbuild Epoxyset NF Epoxy Resin Adhesive - 3Kg

Everbuild Epoxyset NF Epoxy Resin Adhesive - 3Kg 04051406
Ref: 04051406 £23.460ex VAT (£28.150 inc VAT)
Everbuild Epoxyset NF Epoxy Resin Adhesive - 3Kg
Stocked Item
Buy Now

Check this product can be delivered in your area. Please enter your postcode below.

Please Enter Valid Postcode
  • Description
  • Specification
  • Reviews

Everbuild EpoxySET NF Epoxy Resin Adhesive (3kg) is a two-part, fast curing, epoxy resin adhesive blended with fine aggregate that is designed for bedding, gap filling, and repairs to concrete, brick, stone and steel. Providing excellent impact resistance and mechanical strength, EpoxySET is significantly greater than concrete and does not shrink or slump while curing.

It requires no primer and provides excellent resistance to most oils, greases, petroleum, salts and many acids and alkalis. EpoxySET NF is stiff, but easily workable and can be applied by either trowel, spatula or knife from +5°C to +60°C. Typically used for surface repairs of fine cracks and spalls, gap-filling, grouting, bedding fixtures and repairing concrete posts in situ, EpoxySET NF Epoxy Resin Adhesive is CE marked for non structural repairs and is manufactured to BS EN 1504-3:2005.


Specification

3kg two-part fast curing epoxy resin adhesive blended with fine aggregates

Key Features

  • No primer required
  • Manufactured to BS EN 1504-3:2005
  • For use when cured from +5°C up to +60°C
  • Ideal for bedding, gap filling and repairs
  • For surface repairs of fine cracks and spalls
  • For repairing concrete, brick, stone and steel
  • Securing bolts into walls and fixing slip bricks
  • Repairing concrete posts insitu and bedding tiles
  • For gap filling, grouting, bedding fixtures etc.
  • PC Mortar (based on Epoxy Resin) EN1504-3
  • Mechanical strength greater than concrete
  • Resistant to chemicals and solvents
  • Will not shrink or slump on curing
  • Colour: pale grey

Other Information

For the best results with the Everbuild Epoxyset NF Epoxy Resin Adhesive, keep in its original packaging in cool, dry conditions at ambient temperatures between +5°C - +35°C (if possible, +15°C - +20°C). The product has a long shelf life of 24 months, which significantly decreases once opened. When using the product, the user should wear appropriate personal protective equipment (PPE) to ensure that the product does not irritate the skin. If this does happen, wash the area thoroughly with clean water.

Characteristics & Advantages

Elastic Modulus

<15GPa

Thermal Compatibility: Part 4 Dry Cycling

≥ 2.0MPa

Capillary Adsorption

<0.5kg/m²h 0.5

Product Information

Chemical Base

2-component epoxy based mortar

Packaging

3kg pails

Colour

Pale grey

Shelf Life

Use within 24 months

Storage Conditions

Store in unopened containers in cool, dry conditions at ambient temperatures between +5°C - +35°C (ideally +15 - +20°C)

Density

ca. 1.80 g/cm3

Compressive Strength

≤ 0.05%

Tensile Adhesion Strength

≥ 2.0MPa (6.4MPa)

Chemical Resistance

Most aqueous systems, raw sewage, urine, fresh water, sea water, diluted & concentrated alkalis, diluted acids, mineral, vegetable, and animal fats & ammonia

Layer Thickness

3kg is sufficient to cover 1.1m² at 1.5mm thickness

Ambient Air Temperature

+5°C to +40°C

Pot Life

The pot life of this product is 1 hour / 30mins at 20°C. Low temperatures will retard the cure. Do not apply below 4°C.

Curing Time

Initial cure = 5 hours Full cure = 3-5 days (@ 25°C)

There are currently no reviews for this product. If you would like to leave a review, simply press the 'write a review' button below

Stay updated with all our latest news and offers

Newsletter Subscriptions
Submit