25 x 100mm Redwood T&G Loglap Board

25 x 100mm (finish size 18 x 94mm) tongue and groove loglap boarding is cut from slow grown European Redwood timber that is Chain of Custody (COC) certified. Commonly used as cladding on sheds, summer houses and log cabins, loglap boarding is machined in-house and is kiln dried for stability. The tongue and groove profile is designed to provide a watertight fit and allows for some movement, which generally occurs when timber responds to different moisture levels.

Due to the machining process the finished dimensions are smaller than the nominal sizes stated. Generally, the thickness will be 5mm to 6mm less on thickness and 5mm to 8mm less on the width with a finished size of approximately 18 x 94mm. The log lap boards have a cover of 83mm (without the tongue) and are suitable for painting, staining or varnishing. They are available in a range of standard lengths and can be Naturewood green, brown or clear vac treated if required.

Key Features

• Cut from slow grown European Redwood.
• Tongue and groove profile designed to provide a watertight fit.
• Total coverage of 83mm (minus the tongue).
• Chain of Custody (COC) certified.