Main Sales: 01772 431216

Lines open: Monday - Saturday

  1. Home
  2. Building Materials
  3. Timber
  4. Tapers & Tilts
  5. 47 x 100mm Timber Taper Pieces

47 x 100mm Timber Taper Pieces

47 x 100mm Timber Taper Pieces 01020182
Ref: 01020182 £1.930ex VAT Metre (£2.320 inc VAT)
To Order
47 x 100mm Timber Taper Pieces

Check this product can be delivered in your area. Please enter your postcode below.

Please Enter Valid Postcode
  • Description
  • Reviews

47 x 100mm Timber Taper Pieces (also referred to as firrings) are most commonly used to create a fall on flat roofs. These tapered wedges form a slope (or taper) to make sure water runs off the roof, but they can also be used to level floors or ceilings. They’re fastened with nails to the top of existing joists, covered with OSB or ply, and then finally felt.

All of our timber taper pieces are Chain of Custody certified, and can be supplied with a range of treatments: pre-vac treated for internal projects to protect against fungal decay and insect attack; Naturewood Brown or Naturewood Green treated to protect against wet rot caused by ground contact; or untreated.


Name: 47mm x 100mm Timber Taper Piece
Size: 47mm x 100mm
Treatment: Kiln dried and either Pre-vac treated, Naturewood Brown or Green treated, or untreated
Source: Scandinavia

Typical Uses

Roofing Projects
Levelling Floors

Don’t Forget


There are currently no reviews for this product. If you would like to leave a review, simply press the 'write a review' button below

Length Qty Green Treated Brown Treated Clear Vac Treated Cross Cut to Length VCut Point

Stay updated with all our latest news and offers

Newsletter Subscriptions