Main Sales: 01772 431216

Lines open: Monday - Saturday

  1. Home
  2. Building Materials
  3. Timber
  4. Tapers & Tilts
  5. 47 x 150mm Timber Tilt Fillet

47 x 150mm Timber Tilt Fillet

47 x 150mm Timber Tilt Fillet 01020155
Ref: 01020155 £2.160ex VAT Metre (£2.590 inc VAT)
To Order
47 x 150mm Timber Tilt Fillet

Check this product can be delivered in your area. Please enter your postcode below.

Please Enter Valid Postcode
  • Description
  • Reviews

47 x 150mm Timber Tilt Fillets are a versatile timber, most commonly used for roofing projects. Triangular in shape, they’re often used at the edge of a flat roof to form an upstand. The tilt fillet is fixed to the rafters beneath the roof membrane, parallel to the roof tiles. They can also be used to add a slight pitch to a flat roof, allowing water to run off. Or, they can be used to fill the gap between two joists connected at an angle.

All of our timber tilt fillets are Chain of Custody certified, and can be supplied with a range of treatments: pre-vac treated for internal projects to protect against fungal decay and insect attack; Naturewood Brown or Naturewood Green treated to protect against wet rot caused by ground contact; or untreated.


Specifications

Name: 47mm x 150mm Timber Tilt Fillet
Size: 47mm x 150mm
Treatment: Kiln dried and either Pre-vac treated, Naturewood Brown or Green treated, or untreated
Source: Scandinavia

Typical Uses

Roofing Projects


Don’t Forget

Screws
Nails

There are currently no reviews for this product. If you would like to leave a review, simply press the 'write a review' button below

Length Qty Green Treated Brown Treated Clear Vac Treated Cross Cut to Length VCut Point
2.400
3.000
3.600
4.200
4.800

Stay updated with all our latest news and offers

Newsletter Subscriptions
Submit