Main Sales: 01772 431216

Lines open: Monday - Saturday

Dab Pump Evosta 3 60/130

Dab Pump Evosta 3 60/130 08131016
Ref: 08131016 £68.750ex VAT (£82.500 inc VAT)
Dab Pump Evosta 3 60/130
Bulk Rates
QuantityPrice (ex VAT)
1£68.750
2+£63.250
Stocked Item
Buy Now
  • Description
  • Reviews

The Dab Pump Evosta 3 60/130 is a low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. The pump combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ≤ 0.19, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 3 ranks as one of the best products in the category in terms of performance and reliability. The
EVOSTA 3 circulator is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The
product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. The EVOSTA 3 version has a display t showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts and also offers the new function of automatic degassing.
The pump has a cast iron body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.
The settings of the EVOSTA 3 circulator can be modified in the control panel on the facia of the pump device. The pump has nine
settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.
Specification:

Operating Range 0.4 - 3.3m³/h With Head up to 6.9 metres
Pumped Liquid Temperature Range From -10°C to +110°C
Working Pressure 10bar (1000kPa)
Protection Class IPX5
Insulation Class F
Installation With Horizontal Motoer Axis
Standard Power Unit Single Phase 1 x 230V ~ 50/60 Hz
Pumped Liquid Clean, Free from Solids and Mineral Oils, Non-Viscous, Chemically Neutral, With Properties Similar to Water (Glycol Max. 30%) 

 

There are currently no reviews for this product. If you would like to leave a review, simply press the 'write a review' button below

Stay updated with all our latest news and offers

Newsletter Subscriptions
Submit